FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 1468 Parts

Category: Hitch / Drawbar

[Categories] [All 1468 Parts] [All Farmall Models]

No
Picture
3 Point Upper Adjusting Screw, Used - For International tractor models Hydro 186, 1066, 1086, 1466, 1468, 1566, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6788, Replaces International OEM number 108584C1, Right Hand Thread 1.250" -7, 10.00" long, Thread Length 5.125, For a new version of this item use Item #: 108796, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435416) $39.01

Adjusting Screw, Upper - Used on International HYDRO 186, 1066, 1086, 1466, 1468, 1486, 1566, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6788, this screw is 1.25 inches in diameter, 10 inches long, with 5.125 inches thread length. It is used with 149837C1 Lower Screw and 72877C1 Leveling Screw Housing. (Item #: 108796, Ref: 108584C1) $78.00

Center Link Bracket, Used - For International tractor models 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM nos 392210R21, 392210R51, 392210R3, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497177) $50.01

Center Link Handle - Used on 1954221C3 top link center, this handle will replaces OEM part number 1331863C2. Used on International models: 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21256, 21456, 3388, 3588, 3788, 5088, 5488, 6388, 6588, 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8288, 8910, 8920, 8930, 8940, 8950, 9310, 9330, 9350, MTX155, MTX165, MTX175, MTX185, MTX200, MX150, MX170, MX180, MX200, MX220, MX240, MX270, MX275, XTX185, XTX200, XTX215 (Item #: 170271, Ref: 1331863C2) $20.30

Center Link Handle - Used on International Models: 21026, 21206, 2606, 2706, 2806, HYDRO 100, HYDRO 70, HYDRO 86, 100, 1026, 1066, 1206, 1256, 130, 140, 1466, 1468, 1566, 1568, 2504, 404, 504, 544, 606, 644, 656, 664, 666, 686, 706, 744, 756, 766, 806, 826, 844, 844S, 856, 966. This part replaces 392204R1 (Item #: 164316, Ref: 392204R1) $23.90

Control Arm Kit - Control Arm Repair Kit contains, 38256R21 control arm, 380115R2 roller, 383997R1. 56 series tractor models: 756, 856, 1026, 1256, 1456. Early 66 series models: 766, 966, 1066, 1466, 1468, 1566, 786, 886, 986, 1086, 1486, 1586, 3088-3788, 63 For 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 3188, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6488, 6588, 6688, 6788, 706, 756, 766, 786, 806, 856, 886, 966, 986. (Item #: 113499, Ref: 382565KIT) $45.60

Control Arm Kit - Shifter control repair kit contains, 398300R1 arm, 380115R2 roller, 398304R1 spring. Tractors: 766 after serial number 17047, 966 after serial number 32222, 1066 after serial number 57646, 1466 after serial number 30001 all 1566, 786, 886, 1086, 1486, 1586, 3088 thru 3788 6388 thru 6788. For 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 3088, 3188, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6488, 6588, 6688, 6788, 756, 766, 786, 856, 886, 966, 986. (Item #: 111858, Ref: 398300KIT) $76.00

Crank Arm Shaft - For International / Farmall tractor models 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Replaces International OEM number 392085R3, 392085R1, 392085R2, Slotted Hole Style, (Item #: 110983) $353.00

Crank Handle, Lift Arm Screw - 3 point or fast hitch. For tractor models 230, 330, 400, 450, 560, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, International Utility: 300, Farmall Rowcrop: 300, International Utility: 340, Farmall Rowcrop: 340, International Utility: 350, Farmall Rowcrop: 350, International Utility: 404, Farmall Rowcrop: 404, International Utility: 460, Farmall Rowcrop: 460, International Utility: 504, Farmall Rowcrop: 504, International Utility: 544, Farmall Rowcrop: 544, International Utility: 606, 656, Farmall Rowcrop: 656, Hydro 100, Hydro 70, Hydro 86. (Item #: 108883, Ref: 523861R2) $9.80

Drawbar - Used on International tractors (1206, 1256, 1456 all serial number 13892 and up), 966 serial number 270896 and up, 1066, 1206, 1466, 1468, 1566, 1568. Replaces: 397066R1, 397066R2. This swinging drawbar is 38.75 inches Long, 2.5 inches Wide, and 1.5 Thick. It has 1.040 inch diameter holes 22.500 inches and 28.000 inches from front of bar. (Item #: 108539, Ref: 397066R1) $136.00

Drawbar Hammerstrap - Used on International models Hydro 100, Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, this Drawbar Hammer strap replaces 108506C1, 108511C91. If a new space is needed, order part numbers 483858R1 (Item #: 110224, Ref: 108506C1) $82.00

Drawbar Hammerstrap - For International / Farmall tractor models Hydro 100, Hydro 186, 560, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 6388, 6588, 6788, 21026, Replaces International OEM number 400297R1, Pin hole is 5-1/2" from bend in strap, For use with spacer 368514R1 (110041), (Item #: 110042) $192.87

Drawbar Hammerstrap Spacer - For International / Farmall tractor models Hydro 100, Hydro 186, 560, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 6388, 6588, 6788, 21026, Replaces International OEM number 368514R1, (Item #: 110041) $11.60

Drawbar Pin, Front - Check the size of the pin before ordering. Many models listed use more than one size. This pin measures 1.375 inches in diameter and is 4.965 inches long. Used on International models: 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788. Replaces OEM number 108505C1 (Item #: 112538, Ref: 108505C1) $15.90

Drawbar Pin, Front - Measure before ordering as many models listed used more than one pin. This headed pin measures 1 inch in diameter by 3-3/4 inches long. It is used on International models 1026, 1206, 1256, 1456, 756, 806, 826, 856, 1066, 1466, 1468, 1566, 1568, 766, 966. This pin is used with 393501R11 front tube as well as other applications. (Item #: 160776, Ref: 389428R1) $25.30

Drawbar Pin, Front - Measure before ordering as many models listed used more than one pin. This headed pin measures 3.437 inches long with a 1.125 inch diameter. In some applications it is used with 49139D lock plate, sold separately. Used on H serial number 39937 and above, Hydro 70, Hydro 86, Super H, 300, 350, 404, 504, 544, 606, 656, 664, 666, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 2404, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21206, 21256, 21456. Replaces international part number 57654D (Item #: 112537, Ref: 57654D) $16.20

Drawbar Stop Block - Used on the following models with one piece swinging drawbars: Hydro 100, Hydro 186, 766 serial number 13893 and above, 786, 886, 966 serial number 27090 and above, 986, 1066 serial number 45052 and above, 1086, 1466 serial number 24403 and above, 1468 serial number 10084 and above, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788. Replaces International part number 108507C1 (Item #: 153256, Ref: 108507C1) $22.70

Drawbar Stop Block - For the following tractors with 2 piece Swinging Drawbars: 1066 serial number 45051 and before, 1466 serial number 24402 and before, 1468 serial number 7114 and before, 1566 serial number 7114 and before, 1568 serial number 7205 and before. Two are used per tractor. Sold individually. Replaces 65300C1 (Item #: 165197, Ref: 65300C1) $33.90

Drawbar Support, Used - For International tractor models 1066, 1206, 1256, 1456, 1466, 1468, 1566 (s/n 7114-earlier), 1568 (s/n 7205-earlier), 21206, 21256, 21456, Replaces International OEM nos 393776R1, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499578) $234.01

Duckhead - This leveling screw pivot, also know has duckhead, fits 1 inch screw. For tractor models Hydro 100, Hydro 70, Hydro 86, 1026, 1066, 1466, 1468, 21026, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 544, 656, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966. (Item #: 172990, Ref: 383990R2) $105.00

Duckhead Pivot Assembly - Duckhead Pivot Assembly, 1 inch Screw Includes: duckhead, collar w/ set screws, hardened washer and weld on washer. Fits 1 inch Shaft. Contains 1 - 383990R2, 2 - HD78CUP, and 1 Set screw. (Item #: 122667, Ref: 223315) $69.00

Front Stabilizer Eyebolt - Used with 392183R1 stabilizer control arm and 522246R1 pin, this part is used on International models: 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788 (Item #: 108838, Ref: 392185R1) $22.00

Front Tube Assembly - Measuring 47.50 inches in length, this front tube assembly is used with 397066R1 Drawbar, 49139D Lock plate, 57654D Front Drawbar Pin. Used on International Tractors 1066, 1206, 1256, 1456, 1468. Replaces OEM number 391988R91. Additional $15.00 shipping due to weight. (Item #: 108837, Ref: 391988R91) $405.00

Hammerstrap Space - Used with 108506C1 Hammerstrap, this part replaces 483858R1, 108512C1. Used on International tractor models Hydro 100, Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788 (Item #: 123825, Ref: 483858R1) $7.60

Latch Spring, Lower - Used with 382192R1, 398373R1, and 398399R1 Latches, this part is used on three point hitches on the following models: 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 21026, 21206, 21256, 21456. Replaces 382192R1 (Item #: 109644, Ref: 382192R1) $11.20

Latch Spring, Upper - Used with 382192R1, 398373R1, and 398399R1 Latches, this part is used on three point hitches on the following models: 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 21026, 21206, 21256, 21456. Replaces 382193R1 (Item #: 108835, Ref: 382193R1) $11.10

Leveling Screw Assembly - Used on both the left and the right side, this leveling screw is 24.750 inches long and 1.375 inches in diameter. It is used on: 1066 below serial number 48907, 1206, 1256, 1456, 1466 below serial number 26201, 1468. Used with 398384R1 screw housing (not included). This part replaces International part number 398378R1 (Item #: 111206, Ref: 398378R1) $170.00

Leveling Screw Housing - Used with 398378R1 leveling screw, this housing measures 16.375 inches. It is used on: 1066 below serial number 48907, 1206, 1256, 1456, 1466 below serial number 26201, 1468. (Item #: 109524, Ref: 398384R1) $91.00

Linkage Stud - This stud is used in association with 392185R1 Eyebolt, 392193R21 Lockout pin, 392195R1 Eyebolt, 406248R2 Rear yoke, 406249R1 Front yoke, 522246R1 Pin, 67693C1 Pivot Pin. This stud is 1.250 inches in diameter. (Item #: 108845, Ref: 406247R1) $30.60

Lower Adjusting Screw - Measuring 12.125 inches over all length, this Adjusting Screw and 1.250 inch - 7 thread. The threaded portion is 6.268 inches long. This part replaces: 1272852C1, 1272852C91. It is used on HYDRO 186, 1066, 1086, 1466, 1468, 1486, 1566, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6788, 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 7288, 7488, 8910, 8920, 8930, 8940, 8950. This part is used with 108584C1 Upper Adjustment Screw, 149836C4 Leveling Screw Housing, 149838C1 Upper Adjustment Screw, 72877C1 Leveling Screw Housing. (Item #: 108795, Ref: 149837C1) $82.00

Lower Lift Arm Front Bushing - This inside diameter of this bushing is 1.009 inches. The outside diameter is 1.252 inches. It is used on international models: 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488. It is used on the front lower link. The part replaces OEM numbers 1272681C1, 71808C1, 392180R1 (Item #: 165272, Ref: 1272681C1) $41.05

Lower Link Pin Retainer, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 21026, 21206, 21456, Replaces International OEM nos 406687R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453564) $9.01

Lower Pull Arm Pin - Used on International models Hydro 100, Hydro 186, 544, 656, 706, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2544, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3488, 3688, this part replaces 406685R1 (Item #: 112530, Ref: 406685R1) $20.60

Lower Pull Arm Pin - Used on International models: Hydro 100, 766, 786, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 21206, 21256, 21456. Replaces 406686R2, 406686R1 (Item #: 112529, Ref: 406686R2) $34.00

No
Picture
Lower Pull Arm Pin, Used - For International tractor models Hydro 100, Hydro 186, 544, 656, 706, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2544, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3488, 3688, Replaces International OEM number 406685R1, Front Pin, For a new version of this item use Item #: 112530, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435596) $11.01

Pivot Pin - Used on International 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788, this pin replaces International OEM numbers 67693C1, 392184R1. 392184R1 is a threaded pin, but this will work in its place. Used with 406250R1 sway limiter. (Item #: 108842, Ref: 67693C1) $36.70

Rear Stabilizer Eye Bolt - Used on Category III three point hitches, this part is used with 522246R1 Pin (not included). Fits International models: 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788. (Item #: 108840, Ref: 392195R1) $57.00

Slotted Style Crank Arm - Left Hand - For International / Farmall tractor models 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Replaces International OEM number 392090R3, (Item #: 126554) $171.00

Stabilizer Control Arm - Used on Category III hitches, this Stabilizer Control Arm is used on International Models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788. It is used with 392185R1 Eyebolt, 392195R1 Eyebolt, 406250R1 Sway Limiter, 522246R1 Pin, 67693C1 Pivot Pin. (Item #: 108839, Ref: 392183R1) $407.00

Stabilizer Control Arm, Used - For International tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788, 21206, 21256, 21456, Replaces International OEM number 392183R1, Category 3, For a new version of this item use Item #: 108839, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408839) $180.01

Stabilizer Yoke Pin - Used front and rear on Category III hitches, this pin measures A - 2.500 inches long and, B - .745 inches in diameter. Replaces 392194R1, 522246R1. (Item #: 155140, Ref: 522246R1) $5.10

Stabilizer Yoke, Front - Part of the 406250R1 assembly, this part is the Front Yoke. It measures 3.980 inches long. Used on International models: 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788. Replaces International part numbers 406249R1 (Item #: 108847, Ref: 406249R1) $78.00

Stabilizer Yoke, Rear - Part of the 406250R1 assembly, this part is the Front Yoke. It measures 6.125 inches long. Used on International models: 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788. Replaces International part numbers 406248R2 (Item #: 108846, Ref: 406248R2) $71.00

Sway Limiter Assembly - Consisting of one each of 406249R1 Yoke, 406247R1 Stud, 406248R2 Yoke, 392193R21-BP Pin, this is a complete assembly. It is used on International tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788. Replaces 406250R1 (Item #: 108841, Ref: 406250R1) $146.00

Sway Limiter Cam, LH, Used - For International tractor models 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Replaces International OEM nos 142583C1, 70481C1, Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497175) $147.01

Sway Limiter Cam,RH, Used - For International tractor models 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Replaces International OEM nos 142584C1, 70482C1, Right Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497172) $147.01

Sway Limiter Lockout Pin - Used on 406250R1 sway limiter on the following International tractors: 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788 (Item #: 108843, Ref: 392193R21) $11.60

Telescoping Lift Arm Latch - For Category II three point hitches, this latch is used on International models: 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 21206, 21256, 21456. Order 382193R1 Upper Spring and 382192R1 Lower Spring if need (sold separately). Replaces 398399R1 (Item #: 109523, Ref: 398399R1) $25.00

Top Link Center - The body of this top link center measures 11.630 inches long, with 5-1.25 inch acme right and left hand threads. It replaces 404633R1, 404633R2. Used on IH models Hydro 100, Hydro 186, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 21206, 21256. It is used with 395968R2 rear end, and 395970R2 front end, neither are included. Comes with 108592C2 handle. (Item #: 167699, Ref: 404633R2) $181.00

Top Link Pin - Replacing OEM part numbers 1286040C5, 1286826C2, 1286840C7, 392208R12, P6840, this top link pin has a diameter of 1.25 inches. It is used on the following models: 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206 Indust/Const, 21256 Indust/Const, 21456 Indust/Const, 3388, 3588, 3788, 4100 Indust/Const, 4166, 4186, 5088, 5288, 5488, 6388, 6588, 6788, 7110, 7130, 7210, 7230 (Item #: 108553, Ref: 1286840C7) $37.20

Torsion Spring Bar, Used - For International tractor models 966 (Hydros), 1066 (s/n 53785-earlier), 1086, 1466 (s/n 28107-earlier), 1468, 1486, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Replaces International OEM nos 71385C1, 71385C2, Used with Crank Arm Shaft 71387C1, Length: 21 5/8", Uses Locating Bolt 71390C1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499579) $176.01

Torsion Spring Bar, Used - For International tractor models 966 (Hydros), 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21206, 21256, 21456, Replaces International OEM nos 392088R1, Used with Crank Arm Shaft 392085R3, Uses Retainer 3946677R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499580) $145.01

Universal Parts and Accessories
Category: Hitch / Drawbar

Center Link Pin - For tractors using a Category 1 3 point hitch. Pin diameter of 3/4 of an inch. Usable length of 3 inches. Overall length of 4 15/32. Head diameter of 7/8 of an inch, with a 1/2 inch hole. Fits many models. Verify dimensions for your specific application. Can be used with DKP14 linch pin. (Item #: 108702, Ref: 957E560) $1.80

Check Chain and Pin Kit - Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Item #: 111334, Ref: CBPN598A) $9.20

Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184153, Ref: FH1447) $364.00

Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184167, Ref: FH1448) $364.00

Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179611, Ref: FH14416) $439.00

Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179008, Ref: FH14417) $439.00

$Farmall 1468 Drawbar, Universal Cat I, 20-1\2 Inch$
Drawbar, Universal Cat I, 20-1/2 Inch - Universal Category I Drawbar Measures: (A) 1-7/64 inches thick, (B) 2-3/8 inches wide, (C) 20-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 2-1/32 inches from body edge to center of first body hole, (F) 3-3/32 inch center to center between holes, (G) 7/8 inch end pin, (H) Five 25/32 inch holes. (Item #: 179615, Ref: S.49123) $57.00

$Farmall 1468 Drawbar, Universal Cat I, 25-1\2 Inch$
Drawbar, Universal Cat I, 25-1/2 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 25-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-29/64 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Seven 25/32 inch holes. (Item #: 178799, Ref: S5009) $39.30

$Farmall 1468 Drawbar, Universal Cat I, 29-3\4 Inch$
Drawbar, Universal Cat I, 29-3/4 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 29-3/4 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-1/2 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Nine 25/32 inch holes. (Item #: 178800, Ref: S128196) $48.80

$Farmall 1468 Drawbar, Universal Cat I, 30-1\8 Inch$
Drawbar, Universal Cat I, 30-1/8 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-1/8 inches center to center on lower link pins, (D) 2-1/16 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Eleven 25/32 inch holes. (Item #: 103174, Ref: S125) $42.10

$Farmall 1468 Drawbar, Universal Cat II, 30-3\4 Inch$
Drawbar, Universal Cat II, 30-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 25/32 inch holes. (Item #: 103176, Ref: S126) $57.00

$Farmall 1468 Drawbar, Universal Cat II, 30-3\4 Inch$
Drawbar, Universal Cat II, 30-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 3/4 inch holes. (Item #: 103176, Ref: S60155) $57.00

$Farmall 1468 Drawbar, Universal Cat II, 36-1\4 Inch$
Drawbar, Universal Cat II, 36-1/4 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 3-1/8 inches wide, (C) 36-1/4 inches center to center on lower link pins, (D) 2 inches from center of pin to edge of body, (E) 3-35/64 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1-19/64 inch holes. (Item #: 179623, Ref: S15134) $132.00

$Farmall 1468 Drawbar, Universal Cat II, 36-29\32 Inch$
Drawbar, Universal Cat II, 36-29/32 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 36-29/32 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-9/16 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1 inch holes. (Item #: 179670, Ref: S3394) $94.00

$Farmall 1468 Drawbar, Universal Cat II, 36-3\4 Inch$
Drawbar, Universal Cat II, 36-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 36-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-7/8 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Thirteen 3/4 inch holes. (Item #: 103177, Ref: S60156) $95.30

$Farmall 1468 Drawbar, Universal Cat II, 39-3\8 Inch$
Drawbar, Universal Cat II, 39-3/8 Inch - Drawbar, Universal Cat II, 39-3/8 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 39-3/8 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 7-7/8 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Seven 1-1/8 inch holes. (Item #: 179583, Ref: S15081) $99.00

$Farmall 1468 Drawbar, Universal Cat III, 42-3\4 Inch$
Drawbar, Universal Cat III, 42-3/4 Inch - Drawbar, Universal Cat III, 42-3/4 Inch - Universal Category III Drawbar Measures: (A) 1-49/64 inches thick, (B) 3-1/2 inches wide, (C) 42-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 5-61/64 inches from body edge to center of first body hole, (F) 4-21/64 inch center to center between holes, (G) 1-27/64 inch end pin, (H) Seven 1-1/4 inch holes. (Item #: 180531, Ref: S29139) $284.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.40

Leveling Assembly - Universal Economy Leveling Assembly. 1-5/16" body of high strength tubing, thread size, 7/8" fine thread-study clevis at each end with 5/8" pin holes. May be used right or left. Can Replace NCA577A and Fork. 18 inches closed, 28 inches open. (Item #: 154104, Ref: LB152) $31.10

Lift Arm Bushing - This Bushing is for using Category I Implements with Category II Lower Lift Arms. It has a 7/8 Inside Diameter, and 1-1/8 Outside Diameter and is 1-3/4 Inches long. Replaces B500192, 87299215, 87760407, EC0NG992AA, 150-821, BUSH04, 22BCO006, 477RB, BO821, 2430351, B821, B2008, 351, 00351, C7NNG992A, 81819374 (Item #: 108626, Ref: BUSH04) $2.60

Linch Pin, Pack of 2 - Package of 2 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. (Item #: 153791, Ref: DKP516) $1.30

Linch Pins, Pack of 2 - Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Item #: 153789, Ref: DKP14) $1.10

Linch Pins, Pack of 2 - Package of 2 linch pins, 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Cold Forged. Enter 1 for package of 2. (Item #: 153792, Ref: DKLP91) $1.20

Linch Pins, Pack of 2 - Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long. (Item #: 153788, Ref: DKP316) $1.10

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 490mm (19 15/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches). Verify that the measurements will meet the requirements of your application. (Item #: 185049, Ref: 159332) $45.10

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 21.5 Inches Center to Center (A), Thickness: 5/8 inches, Width 2 9/16 inches, 7 1/4 Inches from center of ball joint for first hole (B), 9 1/4 inches from center of ball to second hole (C). Verify that the measurements will meet the requirements of your application. (Item #: 103203, Ref: 159324) $41.10

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 595mm (23-7/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 13-3/4 inches, 12 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 185732, Ref: 159326) $61.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 645mm (25 13/32 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 14-3/4 inches, 13 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 184428, Ref: 159328) $55.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 700mm (27 9/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 16-1/4 inches, 13 inches and 6-1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103206, Ref: 159330) $64.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 750mm (29 1/2 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), One hole located 6 1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103207, Ref: 159322) $60.00

Mower Deck Height Stabilizer Kit - Fits all category 1 tractors. Chain length is 40 inches. Maintains consistent mower height and eliminates need for stabilizer bars. Contains two top brackets and two lower brackets with chain. (Item #: 103201, Ref: MHSK1) $36.00

Quick Hitch A-Frame Design - Makes for easier implement attachment, by use of self-aligning steel roller. System self-aligns as tractor�s 3-point hitch is raised. This is a CE Approved, Cat I. 2645 pound capacity. For implement side adapter, see part number S23465. Additional $200.00 shipping due to weight. (Item #: 179003, Ref: S110168) $337.00

Quick Hitch A-Frame Implement Adapter - Used with S110168 quick hitch, this is a weld on bracket. The load capacity is3306 pounds. (Item #: 179380, Ref: S23465) $103.21

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. This part ships via truck freight. Please call for pricing and ordering. (Item #: 180731, Ref: HF141101) $330.00

Stabilizer Assembly - This Stabilizer Assembly measures 14 inches minimum to 17.5 max. It has 7/8 inch pin holes and 12 degree bend on the link side. This part is sold a a universal part. Verify measurements before ordering. (Item #: 179605, Ref: 343437X1) $21.90

Stabilizer Chain - This Stabilizer Chain is sold as a universal part. Verify measurements before ordering. It is Adjustable 11.75 inches to 13.5 inches with a 3.5 inch body. 7/16 inch Pin Diameter. (Item #: 173628, Ref: 159350) $27.40

Stabilizer Chains, Set - 1 SET OF 2 stabilizers for ford tractors having an extra link which allows easy attachment to large and small model tractors by uncoupling the clevis and pin and moving up or down one link of the stabilizer accordingly. (Item #: 174066, Ref: SK102CH) $62.00

Stabilizer Link - This Stabilizer Link is used on Compact Tractors. It adjusts from 15.5 inches to 19.5 inches. The Link Side is 0.79 inches. The Eyelet Side is 0.90 inches. This part is sold as a universal part. Verify measurements before ordering. (Item #: 179606, Ref: VPL3232) $30.60

Top Link - Economy Top Link, 16 inch body. Category 1, 3/4 inch balls. Adjusts 20.5 to 29 inches overall. Dichromate plated center body. OEM JSA5050 (Item #: 184512, Ref: 30533E91) $27.30

Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1 inch thick x 2-1/2 inch width) . Prevents drawbar from rotating. (Item #: 178107, Ref: 49A29) $25.70

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hitch / Drawbar

[Categories] [All 1468 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy